Pubblicazioni

PUBLICATIONS ON INTERNATIONAL JOURNALS


Botti L., Duraccio V., Gnoni M.G., Mora C. (2018) “An integrated holistic approach to health and safety in confined spaces“, Journal of Loss Prevention in the Process Industry, Volume 55, Pages 25-35. https://doi.org/10.1016/j.jlp.2018.05.013.


Botti, L., Mora, C., Regattieri, A. (2017) “Application of a mathematical model for ergonomics in lean manufacturing”, Data In Brief, Volume 14, Pages 360-365. ISSN 23523409. DOI 10.1016/j.dib.2017.06.050.


Botti L., Mora C., Antonucci A., Carty P., Barr A., Rempel D. (2017)  “Carbide-tipped bit wear patterns and productivity with concrete drilling”, Wear, Volumes 386–387, Pages 58-62, ISSN 0043-1648, https://doi.org/10.1016/j.wear.2017.05.017.


Botti, L., Mora, C., Regattieri, A. (2017) “Integrating ergonomics and lean manufacturing principles in a hybrid assembly line”, Computers & Industrial Engineering, Volume 111, 2017, Pages 481-491, ISSN 0360-8352.


Botti, L., Ferrari, E., & Mora, C. (2017). Automated entry technologies for confined space work activities: a survey. Journal of Occupational and Environmental Hygiene, 14(4), 271-284. doi:10.1080/15459624.2016.1250003. PubMed index 27754794.


Bortolini M., Botti L., Cascini A., Gamberi M., Mora C., Pilati F. (2015) “Unit-load storage assignment strategy for warehouses in seismic areas”, Computers & Industrial Engineering, vol. 87, pp. 481-490. (DOI: 10.1016/j.cie.2015.05.023).


Gamberini R., Grassi A., Mora C., Rimini B. (2009) “A fuzzy multi-attribute model for risk evaluation in workplaces. Safety Science, vol. 47, pp. 707 – 716. (ISSN: 0925-7535). ELVESIER.


PUBLICATIONS ON NATIONAL JOURNALS

Botti L., Mora C., Zecchi G. (2017) “Soluzioni tecniche per l’ergonomia del lavoro e applicazioni in diversi settori produttivi: una procedura e la Banca delle Soluzioni”. Rivista Ambiente e Lavoro n.52. pp. 3-37.


Mora C., Botti L. (2017) “La Banca delle Soluzioni per il lavoro negli ambienti confinati: soluzioni tecnologiche per l’eliminazione dei rischi” per gli ambienti di lavoro confinati e per il sovraccarico biomeccanico”. Dossier Ambiente n.119. III Trimestre 2017. Anno XXX. pp 119-124. ISSN 1825-5396.


Mora C., Botti L. (2016) “Banca delle soluzioni: Soluzioni tecnologiche per l’eliminazione o la “riduzione del rischio” per gli ambienti di lavoro confinati e per il sovraccarico biomeccanico”. Dossier Ambiente n.116. Salute Sicurezza Lavoro. IV Trimestre 2016. Anno XXIX. pp 85-96. ISSN 1825-5396.


Botti L., Mora C., Ferrari E., D’Elia V., Galli P., Migliore A., Zecchi G., Broccoli M., Capogrossi S., Balboni P. (2016) “Banca delle Soluzioni: tecniche e tecnologie per un’efficace risposta all’eliminazione e alla riduzione dei rischi negli ambienti di lavoro” (Solutions Database: technologies and techniques for an effective elimination or reduction of the risk in workplaces). Rivista Italiana di Ergonomia. Special Issue 1/2016. Ergonomia: sfide sociali e opportunità professionali dalla creatività alla pratica per aumentare l’impatto dell’ergonomia nella società. pp 35-40. ISSN 2037-3910.


Mora C., Botti L. (2016) “Ambienti di lavoro confinati e sovraccarico biomeccanico: il progetto Banca delle Soluzioni”, in Progetto Sicurezza 3-4, pp 43-49. ISSN: 1128-3386.


Botti L., Ferrari E., Galli P., Gandolfi L., Migliore A., Mora C. (2016) “Migliorare l’ergonomia nell’industria della lavorazione delle carni:Il caso di un’azienda di lavorazione del prosciutto crudo”, in Ambiente & Sicurezza sul Lavoro, January 2016, ISBN: 0393-7054.


Botti L., Mora C., Regattieri A. (2013) “I rischi delle attività manutentive negli ambienti confinati. Un processo per una loro corretta valutazione” (The risk of maintenance in confined spaces. A procedure for an effective assessment), in Manutenzione Tecnica e Management, ISSN: 1123-1084, Year XX – number 9:28-29 – September 2013.


BOOK CHAPTERS

Bortolini M., Botti L. Galizia F. G., Mora C. (2019) “Safety, Ergonomics and Human Factors in Reconfigurable Manufacturing Systems” in Reconfigurable Manufacturing Systems: From the Design to Implementation pp. 129-146.


Botti L., Mora C., Zecchi G. (2016) “Engineering controls and industrial applications for ergonomics”, in Ergonomics: Challenges, applications and new perspectives, pp. 49-110. Nova Science Publishers, Hauppauge, NY (USA). ISBN: 978-1-53610-248-2.


CONFERENCE PROCEEDINGS

Botti L., Caporale A., Coccagna M., Mora C. (2020) “Ergonomics Principles for the Design of an Assembly Workstation for Left-Handed and Right-Handed Users”, in Advances in Manufacturing, Production Management and Process Control. Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control, July 24–28, 2019, Washington D.C., USA


Botti L., Mora C., Zecchi G., Baruffaldi G. (2019) “The Effect of Speed Variation on Initial and Sustained Forces During Pushing and Pulling Activities: A Preliminary Study”. Advances in Manufacturing, Production Management and Process Control Chapter No: 16. Proceedings of the AHFE 2018 International Conference on Human Aspects of Advanced Manufacturing. July 21 – 25, 2018. Orlando, FL (USA) DOI:10.1007/978-3-319-94196-7_16.


Battini D., Botti L., Mora C., Sgarbossa F. (2018) “Ergonomics and Human Factors in Waste Collection: Analysis and Suggestions for the Door-To-Door Method”. Proceedings of the 16th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018), June 11-13, 2018. Bergamo (Italy).


Botti L., Mora C., Piana F., Regattieri A. (2018) “The impact of ergonomics on the design of hybrid multi-model assembly lines in manufacturing”, in Advances in Intelligent Systems and Computing. Proceedings of the AHFE 2017 International Conference on Human Aspects of Advanced Manufacturing. July 17 – 21, 2017. Los Angeles, CA (USA). Volume 606. Pages 167 – 178. ISBN 978-3-319-60473-2. DOI 10.1007/978-3-319-60474-9


Botti L., Mora C., Calzavara M. (2017) “Design of job rotation schedules managing the exposure to age-related risk factors”, The 20th World Congress of the International Federation of Automatic Control (IFAC 2017), 9-14 July 2017. Tolouse (France).


Botti L., Mora C., Ferrari E. (2017) “A Methodology for the Identification of Confined Spaces in Industry”. In: Campana G., Howlett R., Setchi R., Cimatti B. (eds) Sustainable Design and Manufacturing 2017. SDM 2017. Smart Innovation, Systems and Technologies, vol 68. Springer, Cham. DOI: 10.1007/978-3-319-57078-5_66


Botti L., Bragatto P. A., Duraccio V., Gnoni M. G., Mora C. (2016) “Adopting IOT technologies to control risks in confined space: a multi-criteria decision tool”. Chemical Engineering Transactions, 53, 127-132. 2283-9216. DOI: 10.3303/CET1653022. CISAP-7, Ischia, Italy.


Botti L., Duraccio V., Gnoni M. G., Mora C. (2015) “A framework for preventing and managing risks in confined spaces through IOT technologies”, Safety and Reliability of Complex Engineered Systems – Proceedings of the 25th European Safety and Reliability Conference, ESREL 2015, pp. 3209-3217. ISBN: 9781138028791. DOI: 10.1201/b19094-423


Botti L., Mora C., Regattieri A. (2015) “Improving ergonomics in the meat industry: a case study of an Italian ham processing company”, 15th IFAC Symposium onInformation Control Problems inManufacturing – INCOM 2015. IFAC Proceedings Volumes (IFAC-PapersOnline), 48 (3), pp. 598-603. ISSN 2405-8963. DOI: 10.1016/j.ifacol.2015.06.147.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84953875947&partnerID=40&md5=64b0cccc34920ea5938b7a38b99c610e


Botti L., Gamberi M., Manzini R., Mora C., Regattieri A. (2014) “A bi-objective optimization model for work activity scheduling of workers exposed to ergonomic risk”, Proceedings of the XIX Summer School “Francesco Turco”, September 2014, Senigallia (Ancona). Scopus index 2-s2.0-84982830395.


Bortolini M., Botti L., Cascini A., Gamberi M., Mora C. (2014) “Multi-objective assignment strategy for warehouses served by automatic storage and retrieval system”, International Conference on Industrial Logistics, ICIL 2014 – Conference Proceedings, pp. 127-134.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84905749928&partnerID=40&md5=ef875d0ae51cbb79baf69676e30867c2